Contax SW II - REV 4.01 Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Napájecí adaptéry a střídače Contax SW II - REV 4.01. R2J20702NP Datasheet - Renesas Electronics Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 28
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
REJ03G1782-0401 Rev.4.01 Page 1 of 27
Jun 17, 2010
Target Specification Datasheet
R2J20702NP
Peak Current Mode Synchronous Buck Controller
with Power MOS FETs
Description
This all-in-one SiP for POL (point-of-load) applications is a multi-chip module incorporating a high-side MOS FET,
low-side MOS FET, and PWM controller in a single QFN package. The on and off timing of the power MOS FET is
optimized by the built-in driver circuit, making this device suitable for large-current high-efficiency buck converters.
In a simple peak-current mode topology, stable operation is obtained in a closed power loop, and a fast converter is
easily realized with the addition of simple components. Furthermore, the same topology can be applied to realize
converters for parallel synchronized operation with current sharing, and two-phase operation.
The package also incorporates a high-side bootstrap Schottky barrier diode (SBD), eliminating the need for an external
SBD for this purpose.
Features
Three chips in one package for high-efficiency and space saving
Large average output current (40 A)
Wide input voltage range: 8 to 14 V
0.6 V reference voltage accurate to within 1%
Wide programmable switching frequency: 200 kHz to 1 MHz
Fast response by peak-current-mode topology.
Simple current sharing (up to five modules in parallel)
Two-phase operation in parallel operation
Built-in SBD for boot strapping
On/off control
Hiccup operation under over load condition
Tracking function
Thin small package: 56-pin QFN (8 mm 8 mm)
Terminal Pb-free/Halogen-free
Applications
Network equipment
Telecommunications equipment
Servers
POL modules
Typical Characteristic Curve
75
80
85
90
95
0 5 10 15 20 25 30 4035
Efficiency (%)
Iout (A)
VIN = 12 V
VOUT = 1.8 V
L = 320 nH
CO = 600 μF
Frequency = 500 kHz
No airflow
Ta = 27°C
REJ03G1782-0401
Rev.4.01
Jun 17, 2010
Zobrazit stránku 0
1 2 3 4 5 6 ... 27 28

Shrnutí obsahu

Strany 1 - R2J20702NP

REJ03G1782-0401 Rev.4.01 Page 1 of 27 Jun 17, 2010 Target Specification Datasheet R2J20702NP Peak Current Mode Synchronous Buck Controller wi

Strany 2 - Application Circuit Example

R2J20702NP Target Specification REJ03G1782-0401 Rev.4.01 Page 10 of 27 Jun 17, 2010 Oscillator and Pulse Generator The frequency of oscillation

Strany 3 - Block Diagram

R2J20702NP Target Specification REJ03G1782-0401 Rev.4.01 Page 11 of 27 Jun 17, 2010 Application Example Start-up Settings Case 1) Standalone o

Strany 4 - Pin Arrangement

R2J20702NP Target Specification REJ03G1782-0401 Rev.4.01 Page 12 of 27 Jun 17, 2010 Case 3) Retiometric tracking The TRS-SS of channel two is

Strany 5 - Pin Description

R2J20702NP Target Specification REJ03G1782-0401 Rev.4.01 Page 13 of 27 Jun 17, 2010 Case 4) Current sharing or two-phase operation In the case

Strany 6 - Absolute Maximum Ratings

R2J20702NP Target Specification REJ03G1782-0401 Rev.4.01 Page 14 of 27 Jun 17, 2010 Output Voltage Setting The error amplifier of the device ha

Strany 7 - Electrical Characteristics

R2J20702NP Target Specification REJ03G1782-0401 Rev.4.01 Page 15 of 27 Jun 17, 2010 R2R1VoutAmplifier output: to current-sense comparator50 kΩ5

Strany 8 - Ics-dc — 490 *

R2J20702NP Target Specification REJ03G1782-0401 Rev.4.01 Page 16 of 27 Jun 17, 2010 Equation (3) A0 = ……(3)2 × Nt / RCS × L × Vin × FswSQRT {V

Strany 9 - Description of Operation

R2J20702NP Target Specification REJ03G1782-0401 Rev.4.01 Page 17 of 27 Jun 17, 2010 Study of Vout Accuracy The nominal output voltage is calcul

Strany 10

R2J20702NP Target Specification REJ03G1782-0401 Rev.4.01 Page 18 of 27 Jun 17, 2010 The accuracy of Vout can be estimated by using equation (10

Strany 11 - Application Example

R2J20702NP Target Specification REJ03G1782-0401 Rev.4.01 Page 19 of 27 Jun 17, 2010 Current Sharing Simply tie the Ishare pins togetherVOUTDevi

Strany 12 - Jun 17, 2010

R2J20702NP Target Specification REJ03G1782-0401 Rev.4.01 Page 2 of 27 Jun 17, 2010 Application Circuit Example VINPGNDSWBOOTREG5ON/OFFSYNCIREFC

Strany 13

R2J20702NP Target Specification REJ03G1782-0401 Rev.4.01 Page 20 of 27 Jun 17, 2010 Current Sharing and Synchronization Tie the Ishare and SYNC

Strany 14 - (Peak Curent Mode)

R2J20702NP Target Specification REJ03G1782-0401 Rev.4.01 Page 21 of 27 Jun 17, 2010 Timing Chart Peak Current Control (EO-Vbe) / 2(Internal sig

Strany 15 - SQRT {Vin

R2J20702NP Target Specification REJ03G1782-0401 Rev.4.01 Page 22 of 27 Jun 17, 2010 Oscillator and Pulse Generator 1. Standalone operation or

Strany 16

R2J20702NP Target Specification REJ03G1782-0401 Rev.4.01 Page 23 of 27 Jun 17, 2010 2. Operation as a slave chip (simple synchronous operation

Strany 17 - VFB (typical)

R2J20702NP Target Specification REJ03G1782-0401 Rev.4.01 Page 24 of 27 Jun 17, 2010 Hiccup Operation when the Over-Current Limit (OCL) is Reach

Strany 18

R2J20702NP Target Specification REJ03G1782-0401 Rev.4.01 Page 25 of 27 Jun 17, 2010 Main Characteristics 6.76.86.97.07.17.27.37.47.57.67.7–50 –

Strany 19 - External Synchronization

R2J20702NP Target Specification REJ03G1782-0401 Rev.4.01 Page 26 of 27 Jun 17, 2010 1.451.401.351.301.251.201.151.101.0543044045046047048049050

Strany 20 - Two-Phase Operation

R2J20702NP Target Specification REJ03G1782-0401 Rev.4.01 Page 27 of 27 Jun 17, 2010 Package Dimensions yAZELp3.00.0ZDA1cc114151563.00.028294342

Strany 21 - Timing Chart

Notice1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change

Strany 22 - 2 × (CT(F) + 18 pF) × 1 V

R2J20702NP Target Specification REJ03G1782-0401 Rev.4.01 Page 3 of 27 Jun 17, 2010 Block Diagram 50 k50 kActivecurrentsensingSRQQOCP comparator

Strany 23

R2J20702NP Target Specification REJ03G1782-0401 Rev.4.01 Page 4 of 27 Jun 17, 2010 Pin Arrangement (Top view)FBIshareEOIREFREG5SGNDVCINBOOTSWVI

Strany 24

R2J20702NP Target Specification REJ03G1782-0401 Rev.4.01 Page 5 of 27 Jun 17, 2010 Pin Description Pin Name Pin No. Description Remarks VIN

Strany 25 - Vfb (mV)

R2J20702NP Target Specification REJ03G1782-0401 Rev.4.01 Page 6 of 27 Jun 17, 2010 Absolute Maximum Ratings (Ta = 25°C) Item Symbol Rating Unit

Strany 26 - Voff (V)

R2J20702NP Target Specification REJ03G1782-0401 Rev.4.01 Page 7 of 27 Jun 17, 2010 Electrical Characteristics (Ta = 25°C, VIN = VCIN = 12 V, un

Strany 27 - —PVQN0056KA-A

R2J20702NP Target Specification REJ03G1782-0401 Rev.4.01 Page 8 of 27 Jun 17, 2010 (Ta = 25°C, VIN = VCIN = 12 V, unless otherwise specified) I

Strany 28 - SALES OFFICES

R2J20702NP Target Specification REJ03G1782-0401 Rev.4.01 Page 9 of 27 Jun 17, 2010 Description of Operation Peak Current Control The control IC

Komentáře k této Příručce

Žádné komentáře